Zibro S1135 Specifications Page 17
- Page / 82
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
4
17
ADJUSTING THE TIMER
To activate the air conditioner at the desired time, follow the procedure specified below (the remote
control and air conditioner are switched off):
1. Press the Timer button.
2
. Select the desired mode by pressing the Mode button.
3. Select the desired temperature by pressing the
gh button (only
possible when the ‘cool’ or ‘heat’ mode is selected).
4. Select the fan speed (low, medium or high) or automatic mode (only
possible when the Feel, Cool or Heat mode is selected) by pressing the
Fan button.
The fan always operates in the Auto mode when the Dry mode is
selected.
5. Select Swing or no Swing by pressing the Swing button.
6. Press the Timer button (‘h’ flashes).
7. Use the
gh button to select the time at which the air conditioner must
activate (between 0 and 10 hours can be set at every half hour –
between 10 and 24 hours can be set at every hour).
8. Press the Timer button (‘h’ stops flashing) and the preset time appears
in the display.
9. Press the Timer button again to delete the selected data from the memory.
Note: If no buttons are pressed during the programming of the timer function, the remote control will
switch off automatically after 10 seconds.
To switch the air conditioner off at the desired time, follow the procedure specified below (the remote
control and air conditioner are switched off):
1. Press the Timer button.
2. Use the
gh button to select the time at which the air conditioner must deactivate (between 0 and 10
hours can be set at every half hour – between 10 and 24 hours can be set at every hour).
3. Press the Timer button (‘h’ stops flashing), and the preset time will appear in the display.
4. Press the Timer button again to delete the selected data from the memory.
Note: If no buttons are pressed during the programming of the timer function, the remote control will
switch off automatically after 10 seconds.
Note: if ‘h’ is flashing and you press the ON/OFF button once, the preset time will appear in the display. You
can now adjust the time with the
gh button. Press the Timer button again to display the time, which can
now also be adjusted*. If the Timer button is pressed again, the data is stored and the remaining time (that
the air conditioner will be in operation) will appear in the display.
*
Pressing the ON/OFF/RUN button instead of the Timer button deactivates the remote control.
Press the Timer function to check the settings in the display
.
G
Note
Check that the TIMER INDICA
TOR on the indoor unit lights up after the timer has been set.
- S1126 - S1135 - S1153 - S1170 1
- A SPECIFICATIONS 4
- Note: Condensation is drained 5
- C BEFORE USING 6
- D INSTALLATION INSTRUCTIONS 7
- Connecting the power cable 8
- Select the correct location 8
- Cable specifications 11
- OUTDOOR UNIT INSTALLATION 12
- Purging the pipe system 12
- E INSTRUCTIONS FOR USE 14
- Remote control 15
- Placing the batteries 15
- Using the remote control 15
- FEEL mode operating procedure 16
- TIMER mode 16
- OPERATING INSTRUCTIONS 16
- ADJUSTING THE TIMER 17
- F MAINTENANCE 18
- G SAFETY 18
- H PROBLEM SOLVING 20
- I GUARANTEE CONDITIONS 21
- A SPECIFICHE 24
- C PREPARATIVI PRIMA DELL’USO 26
- Schema di installazione 27
- Isolamento termico tubi 30
- Attenzione 31
- Specifiche cavi 31
- INSTALLAZIONE UNITÀ ESTERNA 32
- Svuotamento delle tubazioni 32
- E ISTRUZIONI D’USO 34
- Telecomando 35
- Come inserire le batterie 35
- Utilizzo del telecomando 35
- IMPOSTAZIONE DEL TIMER 37
- F MANUTENZIONE 38
- G SICUREZZA 38
- H RISOLUZIONE DEI PROBLEMI 40
- I CONDIZIONI DELLA GARANZIA 41
- A SPECIFICATIES 44
- B ONDERDELEN 45
- C VOOR INGEBRUIKNAME 46
- D INSTALLATIE 47
- Aansluiting voedingskabel 48
- Kies de juiste locatie 48
- INSTALLATIE BINNENUNIT 49
- Specificaties kabels 51
- INSTALLATIE BUITENUNIT 52
- Vacumeren leidingsysteem 52
- E BEDIENING 54
- BEDIENINGSINSTRUCTIES 56
- FEEL modus bedrijfsprocedure 56
- TIMER modus 56
- INSTELLEN TIMER 57
- Opmerking 57
- F ONDERHOUD 58
- G BEVEILIGING 58
- H STORINGEN VERHELPEN 60
- I GARANTIEBEPALINGEN 61
- A DANE TECHNICZNE 64
- B ELEMENTY KONSTRUKCYJNE 65
- Schemat instalacji 67
- Izolowanie przewodów 70
- 4. Podłączenie kabla 71
- Pompa próżniowa 72
- Schemat zaworu dwudrogowego 72
- INSTRUKCJE DOT. EKSPLOATACJI 74
- Obsługa i wyświetlacz 74
- Odbiornik 75
- Obsada pilota 75
- FUNKCJA CZASOWNIKA 76
- Temperatura pomieszczenia 76
- Funkcje podstawowe 76
- Pożądana temperatura 76
- ZAPROGRAMOWANIE CZASOWNIKA 77
- F KONSERWACJA 78
- G URZĄDZENIE ZABEZPIECZAJĄCE 78
- Właściwości funkcji HEATING 79
- Na verwarmen 79
- H WYKRYWANIE USTEREK 80
- I WARUNKI GWARANCJI 81
Related products and manuals for Split-system air conditioners Zibro S1135
(16 pages)
(24 pages)
(288 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 1.483 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals