Zibro PH 227 Specifications download pdf (Page 6)

A SAFETY REGULATIONS

Before connecting the device, check that:

• The connection voltage corresponds to that on the type plate.

• The socket and power supply are suitable for the device.

• The plug on the cable fits the socket.

• The device is on a stable and flat surface.

Have the electrical installation checked by a recognised expert if you are not sure

that everything is in order.

• The airconditioner is a safe device, manufactured in accordance with CE

safety standards. Nevertheless, as with every electrical device, exercise

caution when using it.

• Never cover the air inlets and outlets.

• Empty the water reservoir through the water drain 8 before moving it.

•

Never allow the device to come into contact with chemicals.

• Do not insert objects into the openings of the device.

• Never allow the device to come into contact with water. Do not spray the

device with water or submerge it as this may cause a short circuit.

• Always take the plug out of the socket before cleaning or replacing the

device or a part of the device.

• NEVER connect the device with the aid of an extension cable. If a suitable,

earthed socket is not available, have one fitted by a recognised electrician.

• Always consider the safety of children in the vicinity of this device, as with

every electrical device.

• Always have any repairs – beyond regular maintenance – carried out by a

recognised service engineer. Failure to do so may lead to invalidation of the

guarantee.

• Always take the plug out of the socket when the device is not in use.

• A damaged electricity cable may only be replaced by the supplier or an

authorised person/service point.

IMPORTANT

• The installation must be completely in accordance with local

regulations, ordinances and standards.

• The device is suitable exclusively for use in dry places, indoors.

• Check the mains voltage. This device is suitable exclusively for

earthed sockets – connection voltage 230 Volt/ 50 Hz.

• The device MUST always have an earthed connection. You may

absolutely not connect the device if the power supply is not earthed.

• The plug must always be easily accessible when the device is

connected.

• Read these instructions carefully and follow the directions.

man_Px2xx_1.qxd 19-05-2008 11:53 Pagina 56

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Zibro PH 227 Specifications Page 6