Zibro PH 227 Specifications Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
PLACING BATTERIES IN THE REMOTE CONTROL
Remove the battery cover by pressing the lips in and then pulling the cover
toward you. Place the new batteries as indicated (pay attention to the plus- (+)
and minus poles (-). Now replace the battery cover
.
Push the plug into the socket.
By pressing both G and H set buttons at the same time, the display will
toggle between Celsius and Fahrenheit.
The following functions can be selected with the mode button
on the
remote control.
Automatic regulation of ventilator speed
Cooling;
Dehumidifying;
Circulating;
Heating (PH227).
AUTOMATIC
In the automatic mode , the device will cool, dehumidify or heat depending on
the ambient temperature. When the temperature in the room changes, the mode
changes automatically in order to maintain the desired temperatur
e as accurately
as possible. The ventilator speed also adjusts automatically. The colour of the
transparent
1
/
2
- ring around the button on the front of the device B will change
depending on the mode.
STERIONIZER
TM
FUNCTION
Press Sterionizer
TM
function to start the function and press again to stop it.
Positive and
negative ions are generated in every operating mode.
LOW NOISE BUTTON
During unit operation. Press low noise button , unit operates at low noise.
Press the button again to cancel the low noise setting and return to the previous
setting. In low noise mode the unit will provide less cooling or heating capacity
.
COOLING
When the cooling mode is activated, the transparent
1
/
2
- ring around the button
on the front of the device B emits a BLUE light.
The following settings are possible in the cooling mode:
The ventilator speed can be adjusted by pressing the
-button
3
2
1
G
NOTE!
Use 2 AAA (1.5 Volt) batteries. Do not use rechargeable batteries.
Replace batteries with new batteries of the same type when the display
becomes fuzzy or the signal deteriorates.
4
60
Cooling mode (blue)
man_Px2xx_1.qxd 19-05-2008 11:53 Pagina 60
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments