Zibro SM 13 2635 Service Manual download pdf (Page 6)

FUNCTION INDICATORS ON INDOOR UNIT DISPLAY PANEL

a AUTO indicator

This indicator illuminates when the air conditioner is in AUTO operation.

b TIMER indicator

This indicator illuminates when TIMER is set ON/OFF

c PRE.-DEF. Indicator

This indicator illuminates when the air conditioner starts defrosting automatically or when the warm

air control feature is activated in heating operation.

d TEMPERATURE indicator

Usually it displays the temperature settings. When change the setting temperature, this indicator

begins to flash, and stops 20 seconds later.

B) It displays the room temperature when the air conditioner is in FAN only operation.

C) When the unit stops operation, it return to original factory settings.

D) Displays the malfunction code or protection code if applicable.

e OPERATION indicator

This indicator flashes after power is on and illuminates when the unit is in operation.

The operation indicator lights flash rapidly (five times per second) when safety protection features come into

operation.

C OPERATING TEMPERATURE

Cooling, heating and dehumidifying are most effective at the following indoor and outdoor temperatures:

CAUTION

• If air conditioner is used outside of the above conditions, certain safety protection features may

come into operation and cause the unit to function abnormally.

• Room relative humidity less than 80%. If the air conditioner operates in excess of a relative

humidity of 80% in the room, the surface of the air conditioner may attract condensation.

Please set the vertical air flow louver to its maximum angle (vertically to the floor), and set HIGH

fan mode.

• For maximum effect of your air conditioner always close doors and windows when cooling or

heating.

106

Temperature

Mode

Cooling operation Heating operation Dehumidifying operation

Room temperature 17ºC - 32ºC 10ºC - 27ºC 17ºC - 32ºC

Outdoor temperature 18ºC - 40ºC 10ºC - 24ºC 18ºC - 40ºC

man_SM132635_uk.qxd 18-01-2008 16:46 Pagina 106

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

Zibro SM 13 2635 Service Manual Page 6