Zibro SRE 157 Specifications download pdf (Page 46)

MANUAL

A INSTALLING THE HEATER

Carefully remove your Zibro Kamin from the box and check the contents.

In addition to the heater you also need to have:

 a manual fuel pump

 a transportation cap

 a fuel cap cover

 these directions for use

Keep the box and the packaging materials (Fig. A) for storage and/or

transportation.

Open the lid of the removable tank

 and remove the piece of cardboard.

Fill the removable tank as indicated in

Section B.

The floor should be firm and completely level. Reposition the heater, when it

is not level. Do not try to correct the situation by placing books or other

goods under the heater.

Please refer to the separate instruction in the carton

box for fixing of the heater.

Insert the plug  into the wall-socket (220/230 Volts - AC / 50 Hz) and set the

correct time using the adjustment keys

 (refer to Section C).

Your Zibro Kamin is now ready for use.

B FILLING FUEL

Do not fill the removable tank in the living room, but in a more suitable place

(there can always be some spillage). Follow the procedure below:

Make sure that the heater is switched off.

Open the lid

 and lift the removable tank  out of the heater (Fig. B).

Note: Some drops may leak from the tank. Put down the removable tank

(cap pointing upwards) and screw off the fuel cap using the fuel cap cover

(Fig. C).

Take the manual fuel pump and insert the smooth, most rigid tube into the

jerrycan. Make sure that it is in a higher position than the removable tank

(Fig. D). Insert the ribbed hose into the opening of the removable tank.

Lock the switch button on top of the pump (turn clockwise).

Squeeze the pump a few times, until fuel starts flowing into the removable

tank. As soon as this happens, there is no need to press any longer.

SRE 157

     

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

No comments

Zibro SRE 157 Specifications Page 46